[ENG] [DKST 51] Resetting Parameters to Default Values

Resetting parameters of the device to default values is necessary in the next cases:

• a login and/or a password to the web interface of the device is lost;
• no information about a current IP address of the device;
• in some cases, after the firmware update procedure

This procedure sets all configured parameters of the device (an IP-address, access filters, a user name, a password, and other settings) into the default values.

To reset parameters in default values, perform the next actions one by one:

• disable the external module for batteries 85M2;
• power off the device;
• click the «Reset» button for resetting parameters;
• switch the device on, while keeping the «Reset» button pressed during 15-20 seconds;
• release the button, all parameters of the device are reset to default values.

After resetting parameters to default values, there is a need to perform the initial configuration of the device – more information see in the document «Firmware Description». Where to Get a Document with a Firmware Description?