[ENG] Appearance and Specifications of a Device

Picture 1 Front appearance of a device with a plugged 1-Wire temperature sensor

Picture 2 Front panel of a device

Sockets, LEDs and controls at the front panel:

1. Sockets for connecting sensors of the 1-Wire standard (temperature, humidity sensors);
2. LED indicators of a status of power supply channels;
3. Ethernet ports 10/100 BASE-TX with CPU and LINK LEDs;
4. LED indicator of a GSM signal;
5. A slot for inserting the SIM card;
6. A socket for plugging in a GSM antenna;
7. «Reset» button for resetting parameters to default values

CPU LEDs near Ethernet ports glow constantly when a device is powered, and flash when transferring packages to the network.

LINK LED near an Ethernet port glows constantly when there is a connection at a corresponding port, and flashes from time to time when receiving packages from the network.

LED indicators of a status of power supply channels are numbered corresponding to a numeration of output sockets of power supply channels at the back panel of a device (Picture 4).

Picture 3 Back appearance of a device

Picture 4 Back panel of a device

Sockets at the back panel:

1. Input socket for a power supply cable;
2. Output sockets for power supply channels.