[ENG] 9.6. [DKSF 70/71.5 IU] I Want to Configure Sending Notifications When a Smoke Sensor Status Is Changed. How to Do This?

Configuration of sending notifications when a smoke sensor status is changed is performed at the page «1W SMOKE SENSORS» of a device web interface:

When clicking the button «Setup» a menu of settings appears to send notifications of the next types: Log, Syslog, e-mail, SMS (in a device with a built-in GSM modem) and SNMP Trap:

where:

Alert – is a checkbox, when checked a device will send notifications if a smoke sensor is switched to the status «Alert». On default: checkbox is not checked

Normal State – is a checkbox, when checked a device will send notifications if a smoke sensor is switched to the status «Normal State». On default: checkbox is not checked

Powered Off or Failed – is a checkbox, when checked a device will send notifications if a connection is lost or when a power supply of a smoke sensor is switched off. On default: checkbox is not checked

After setting all necessary parameters, click the button «Apply changes».