[ENG] 3.6. [DKSF 253.6 IU] It Is Necessary to Send SNMP trap Notifications. How to Configure This?

Owned by Olga Talanova (Unlicensed)
Last updated: Feb 14, 2016
1 min read

IP addresses for sending SNMP TRAP notifications are configured at the page «Setup» of a device web interface. This group of settings allows configuring up to two addresses, where SNMP TRAP notifications will be sent via an SNMP protocol.

Events for these notifications to be sent are specified at other pages of a device web interface.

In the section «SNMP TRAP» it is possible to configure the following:

SNMP Trap Destination #1 - is a field for configuring or changing the first address, where SNMP TRAP notifications will be sent. It is possible to specify an IP address or a domain name. An empty field means SNMP TRAP notifications will not be sent. On default: address is not specified

SNMP Trap Destination #2  – is a field for configuring or changing the second address, where SNMP TRAP notifications will be sent. It is possible to indicate an IP address or a domain name. An empty field means SNMP TRAP notifications will not be sent. On default: аddress is not specified

After configuring all necessary settings, click the button «Apply changes».