[ENG] 9.7. [DKSF 54.3 IU] I Want to Configure Sending Notifications When a Logic Level of a Line Is Changed. How to Do This?

To configure notifications when a logic level of an input line is changed, there is a need to go to the page «INPUTS» of a device web interface:

When clicking a button «Setup», a menu of settings for sending notifications of the next types: Журнал, Syslog, E-mail, SMS и SNMP Trap appears as well as a description of numeric values fo a current level of an input line:

where:

Front (level change 0->1) – is a checkbox, when checked, a device will send notifications if a status of an input line was changed from «0» to «1». On default: checkbox is not checked

Decay (level change 1->0) – is a checkbox, when checked, a device will send notifications if a status of an input line was changed from «1» to «0». On default: checkbox is not checked

Include in Summary Report – is a checkbox, when checked, reports about a status of an input line will be sent by e-mail, SMS and/or SNMP Trap. Time of sending reports is configured on the pages «SMS», «E-MAIL» and «SETUP» of a web interface. On default: checkbox is not checked

Logic 1 – a description of a numeric value of a «logic 1» level of an input line that is clear for understanding is set. This description will be displayed in a field «Logic Level Legend» on the page «INPUTS» of a device web interface and is included in the e-mail, SysLog and/or SNMP Trap notifications.

Logic 0 – a description of a numeric value of a «logic 0» level of an input line that is clear for understanding is set. This description will be displayed in a field «Logic Level Legend» on the page «INPUTS» of a device web interface and is included in the e-mail, SysLog and/or SNMP Trap notifications.

After setting all requested parameters, click the button «Apply changes».