[ENG] 9.5. [DKSF 54.3 IU] For What a Short Pulse Filter Is Necessary in the Settings of an Input Line?

Owned by Olga Talanova (Unlicensed)
Last updated: Jun 11, 2018 by Sergey Eremeev (Unlicensed)
1 min read

Short Pulse Filter – is a field for setting time during which an input line must stay stable to register its status. Therefore, this parameter allows filtering short noise signals or chattering of mechanical contacts. On default: 500ms

A filter of short noise pulses is configured on the page «INPUTS» of a web interface for inputs 1-4 only:

Configuring a filter of short noise pulses for Input lines in a NetPing device