[ENG] 13.1. [DKSF 52/202.10 IU] Can I Control a Device Using SNMP?

The devices NetPing 2/PWR-220 v3/ETH and NetPing 2/PWR-220 v2/SMS support configuring parameters and management via an SNMP v1 protocol.

More detailed information about an SNMP protocol can be read on the next links:

• https://en.wikipedia.org/wiki/Simple_Network_Management_Protocol
• http://www.snmp.com/

OID that are supported by the devices can be found in the MIB files DKSF_52.10.x_ MB.mib, DKSF_202.10.x_ MB.mib on the pages of a description of devices in the section «Documentation and Files»:

• NetPing 2/PWR-220 v3/ETH
• NetPing 2/PWR-220 v2/SMS

Devices support:

• Reading OID using Get, Get-Next requests via an SNMP v1 protocol;
• Setting the OID values using the command Set via an SNMP v1 protocol;
• Sending TRAP notifications on the events