Skip to end of banner
Go to start of banner

[ENG] 9.1. [DKSF 70/71.6 IU] How to Determine a Unique ID of a 1-Wire Smoke Sensor?

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

To read a unique Id of a 1-Wire sensor, there is a need to go to the page «1-WIRE» of a device web interface:

To determine a unique Id using a web interface, there is a need to do as follows:

  1. Unplug all 1-Wire sensors from a device; 
  2. Plug a sensor, which unique number you want to know to a device; 
  3. Go to the address http://<ip_address_of_a_device>/ow_new.cgi or go to the page «1-WIRE» of a web interface. A unique Id of a sensor will be displayed in the browser window.

A unique number of a 1-Wire sensor looks like the following: 2818 0ea2 0600 0039 (16 hexadecimal digits 0..9,a..f).

To plug a 1-Wire sensor, copy its unique number from this page to a corresponding field at the page of a web interface.

  • No labels