Skip to end of banner
Go to start of banner

[ENG] [Draft]9.3. [DKSF 54.3 IU] How to Determine a Unique ID of a Sensor of a «Dry Contact» Type Connected via a 1-Wire Interface?

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

To determine a unique Id using a web interface, there is a need to:

  1. Unplug all 1-Wire sensors from a device; 
  2. Plug a 1-Wire sensor to a device, which Id you want to know; 
  3. Go to the page «1-WIRE» of a web interface. In a window of a browser, a unique Id of a 1-Wire sensor will be displayed.

A 1-wire page of a NetPing device

A unique ID of a 1-Wire sensor looks like 2818 1d24 0900 00e8 (consists of four four-digit numbers in a hexadecimal number system: 0..9, a..f).

To connect a 1-Wire sensor, copy its unique Id from this page to a corresponding field on a page of a web interface.

  • No labels