| Info |
|---|
Information in the section applies to the device UniPing server solution v3/SMS with a built-in GSM modem. |
...
t – is a current temperature, °C
label – is a label of a temperature sensor, it is specified in the field «Memo» on the page «TEMPERATURE» of a device web interface. A label in the text of a notification is quoted. If a label is not specified (empty), then it is not included into SMS.
...
| Info | ||
|---|---|---|
| ||
TEMP.SENSOR n "label" OUT OF RANGE (t1 TO t2), NOW tC |
where:
n – is a number of a temperature sensor, 1..8
t1, t2 – is thresholds of a normal temperature range, °C
t – is a current temperature, °C
label – is a label of a temperature sensor, it is specified in the field «Memo» on the page «TEMPERATURE» of a device web interface. A label in the text of a notification is quoted. If a label is not specified (empty), then it is not included into SMS
...
t – is a current temperature, °C
h_status – is a humidity status, its possible values are: «below normal», «normal», «above normal»
t_status – is a temperature status, its possible values are: «below normal», «normal», «above normal»
label – is a label of a humidity sensor, it is specified in the field «Memo» on the page «HUMIDITY» of a device web interface. A label in the test of a notification is quoted. If a label is not specified (empty), then it is not included into SMS
...
h1, h2 – are the thresholds of a normal relative humidity range, %
label – is a label of a humidity sensor, which is specified in the field «Memo» on the page «HUMIDITY» of a device web interface. A label in the text of a notification is quoted. If a label is not specified (empty), then it is not included into SMS
A notification about the notifications of a relative humidity entering the normal specified range:
...
h1, h2 – are the thresholds of the normal relative humidity range, %
label – is a label of a humidity sensor, it is specified in the field «Memo» on the page «HUMIDITY» of a device web interface. A label is quoted in a text of a notification. If a label is not specified (empty), then it is not included into SMS
A notification about the readings of a relative humidity increasing the specified range:
...
h1, h2 – are the thresholds of a normal relative humidity, %
label – is a label of a humidity sensor, it is set in the field «Memo» on the page «HUMIDITY» of a device web interface. A label is quoted in a text. If a label is not set (empty), then it is not included into SMS
A notification about temperature reading decreasing below a specified range (a temperature sensor is built into a relative humidity sensor):
...
t – is a current temperature, °C
t1, t2 – are the thresholds of a normal temperature range, °C
label – is a label of a humidity sensor, it is specified in the field «Memo» on the page «HUMIDITY» of a device web interface. A label is quoted in a text of a notification. If a label is not set (empty), then it is not included into SMS
A notification about temperature readings entering the normal specified range (a temperature sensor is built into a relative humidity sensor):
...
t – is a current temperature, °C
t1, t2 – are the thresholds of normal temperature range, °C
label – is a label of a humidity sensor, which is set in the field «Memo» on the page «HUMIDITY» of a device web interface. A label is quoted in a text of a notification. If a label is not set (empty), then it is not included into SMS
A notification about temperature readings leaving a specified range (a temperature sensor is built into a relative humidity sensor):
...
t – is a current temperature, °C
t1, t2 – are the thresholds of a normal temperature range, °C
label – is a label of a humidity sensor, which is set in the field «Memo» on the page «HUMIDITY» of a device web interface. A label is quoted in a text of a notification. If a label is not set (empty), then it is not included into SMS
A notification about an analogue smoke sensor switching to a normal status:
...
A feature of sending a daily report as SMS notification about a status of sensors, IO lines and relays is implemented in a device. More detailed information about configuring the time of sending this report can be read in the section «[ENG] 11.9. [DKSF 70/71.6 IU] Настройка времени отправки ежедневного отчета о состоянии датчиков, IO линий и реле в виде SMS-сообщенияConfiguring Time of Sending a Daily Report about a Status of Sensors, IO Lines and Relays as SMS Notifications».