[DKSF 70.3] Connection to WEB interface
A web interface is used to manage a device. To connect to a device and configure its parameters, there is a need to enter and IP address of a device in the address bar of a browser: When working in Internet Explorer, web interface operation speed can be decreased. It is recommended to use the latest version of Google Chrome. Use a command ping from a command line to check a connection with a device: ping 192.168.0.100 IP address of a computer should be in the same subnetwork with an IP address of a device! For example, if a device has an IP address 192.168.0.100, then a computer should have address 192.168.0.11 mask 255.255.255.0 While connecting, a device will request authentication by entering login and password. On default: Make sure that a device responds to ping 192.168.0.100 after the first device activation as well as after resetting its parameters. It is prohibited to use non-ASCII characters ("№", "®", "«" and others, as well as any Cyrillic character) in a username and a password. Otherwise, authentication issues may arise in a web interface in browsers except Google Chrome.Web Interface
Authentication