[DKSF 707.1 IU] Manage device with SNMP v1
A device supports configuring parameters and management via an SNMP v1 protocol. You can find more information about an SNMP protocol on the links: OID supported by a device can be found in a MIB file DKSF 707.1.X.X_MB.mib, which can be downloaded from the web site www.netping.ru A device supports: It is necessary to configure the following parameters using a web interface of a device to access a device via an SNMP v1 protocol: A description of the OIDs supported by a device is represented in the table below: : OID Name Type Access Description RFC 1213 .1.3.6.1.2.1.1.1.0 sysDescr.0 OctetString READ A textual description of a device. For example, NetPing SMS, FW 707.1.4.B-1 .1.3.6.1.2.1.1.2.0 sysObjectID.0 OID READ A number of a branch with parameters of a device. Always 1.3.6.1.4.1.25728 .1.3.6.1.2.1.1.3.0 sysUpTime.0 TimeTicks READ Time from the moment of the last turning a device on .1.3.6.1.2.1.1.4.0 sysContact.0 OctetString READ/ WRITE Administrator's contact data, usually an email .1.3.6.1.2.1.1.5.0 sysName.0 OctetString READ/ WRITE A domain name of a device .1.3.6.1.2.1.1.6.0 sysLocation.0 OctetString READ/ WRITE A location of a device .1.3.6.1.2.1.1.7.0 sysServices.0 Integer READ The binary representation of this OID is a set of supported services. Always 72, a device is a destination host. .1.3.6.1.2.1.2.2.1.1.1 ifIndex.1 Integer READ An interface index. Always 1. .1.3.6.1.2.1.2.2.1.3.1 ifType.1 Integer READ A network interface type of a device. Always 6 .1.3.6.1.2.1.2.2.1.4.1 ifMtu.1 Integer READ Maximum size of data, which are possible to be sent over a network. Always 1514 .1.3.6.1.2.1.2.2.1.5.1 ifSpeed.1 Integer READ Approximate speed of data sending in bits/s. Always 100 000 000. .1.3.6.1.2.1.2.2.1.6.1 ifPhysAddress.1 OctetString READ МАС address of a device. NetPing MIB .1.3.6.1.4.1.25728.911.1.0 npSoftReboot Integer READ/ WRITE Software restart of firmware after writing a value 1 .1.3.6.1.4.1.25728.911.2.0 npResetStack Integer READ/ WRITE An initialization of network protocols while writing a value 1 .1.3.6.1.4.1.25728.911.3.0 npForceReboot Integer READ/ WRITE A forced restart of a device when writing a value 1. The process is identical to a reset, which takes place when turning a power supply on. .1.3.6.1.4.1.25728.3800.1.1.0 npGsmFailed.0 Integer READ A firmware status of a GSM module 0 – ok, 1 – failed, 2 - fatalError .1.3.6.1.4.1.25728.3800.1.2.0 npGsmRegistration.0 Integer READ A registration status of a GSM modem in a network0 - impossible, 1 - homeNetwork, 2 - searching, 3 - denied, 4 - unknown, 5 - roaming, 255 - infoUpdate .1.3.6.1.4.1.25728.3800.1.3.0 npGsmStrength.0 Integer READ GSM signal strength 0..31 =0..100%, 99 =unknown or n/a, 255 =updatingSNMP Protocol Configuration
Supported OID