[DKSF 48.2 IU] Connection to web interface
Web Interface
A web interface is used to manage a device. To connect to a device and configure its parameters, there is a need to enter and IP address of a device in the address bar of a browser:
When working in Internet Explorer, web interface operation speed can be decreased. It is recommended to use the latest version of Google Chrome.
Use a command ping from a command line to check a connection with a device:
ping 192.168.0.100
IP address of a computer should be in the same subnetwork with an IP address of a device! For example, if a device has an IP address 192.168.0.100, then a computer should have address 192.168.0.11 mask 255.255.255.0
Authentication
While connecting, a device will request authentication by entering login and password.
On default:
- Address for connecting to a device: http://192.168.0.100/;
- User: visor;
- Password: ping
Make sure that a device responds to ping 192.168.0.100 after the first device activation as well as after resetting its parameters.
It is prohibited to use non-ASCII characters ("№", "®", "«" and others, as well as any Cyrillic character) in a username and a password. Otherwise, authentication issues may arise in a web interface in browsers except Google Chrome.
When working in Internet Explorer, web interface operation speed can be decreased. It is recommended to use the latest version of Google Chrome.
IP address of a computer should be in the same subnetwork with an IP address of a device! For example, if a device has an IP address 192.168.0.100, then a computer should have address 192.168.0.11 mask 255.255.255.0
Make sure that a device responds to ping 192.168.0.100 after the first device activation as well as after resetting its parameters.
It is prohibited to use non-ASCII characters ("№", "®", "«" and others, as well as any Cyrillic character) in a username and a password. Otherwise, authentication issues may arise in a web interface in browsers except Google Chrome.