[DKSF 48.2 IU] Page HOME web interface

A main page has brief information about a device (a model, series number, software version) and its network interface settings.

Information

Hostname – is a domain name of a device, which is configured on the page Settings. It allows to distinguish several Netping devices of the same type. A name is displayed in a header of a web interface, and is sent in syslog notifications as well as available by SNMP – sysName.

Location – is a description of a place of Netping device installation. It is configured on the page Settings. It is displayed in a header of a web interface and is available via SNMP – sysLocation.

Contact – is contact data (usually an email) of an administrator. It is configured on the page Settings. This value is available via SNMP – sysContact.

Serial Number – is a unique identification number of a device. It must coincide with a number on a sticker of a device. A series number of a device cannot be changed.

MAC Address –– is a unique physical address of a device in the Ethernet network.

Device Model – is a name of a model of a device.

Firmware Version – is a current version of firmware.

Hardware Version – is a version of a printed circuit board and/or packaging of the device.

Uptime - is time of device operaiton since turning on or the last reboot.

Network Settings

IP address – IP address of a device.

Netmask – a mask of a subnet of a device.

Gateway – IP address of a gateway.

After clicking the button Reboot, a device immediately reboots.

While rebooting a device, rebooting of connected loads is possible!